1500L Dual Jet Ice Water Submersion Test Chamber, Durable Ice Water
Shock Tester
Applicable scene:
The ice-water shock chamber is widely used in various fields such
as electronics, automotive industry, aerospace, and medical
equipment. In the electronics industry, for example, it is utilized
to test the reliability of circuit boards, sensors, and other
components under low-temperature conditions. In the automotive
industry, it assesses the performance of automotive parts under
extreme weather conditions, thereby ensuring the stable operation
of products in complex environments.
Product characteristics:
The ice water shock chamber is a special device used to test the
performance and endurance of materials, components, or equipment
under extreme temperature changes and ice water impact conditions.
It can rapidly cool down and spray ice water to simulate harsh
environments, evaluating the reliability and impact resistance of
products.
1. It is suitable for the ice water splash test and ice water
immersion test of the product.
2. The inner box is all made of SUS316# stainless steel plate to
ensure that it will not rust for a long time.
3. Thermal insulation material: high-density glass fiber cotton to
ensure thermal insulation performance and maintain a balanced and
stable temperature in the room.
4. The high-temperature system adopts a long-axis fan motor and
high and low temperature resistant 316 stainless steel multi-wing
impellers to achieve strong convection and vertical diffusion
circulation, so that the temperature in the laboratory is uniform
and stable.
5. Double-layer high-temperature-resistant high-tension sealing
strips are used between the door and the box of the equipment to
ensure the airtightness of the test area.
6. The test hole (diameter 100mm) is installed on the left side of
the device, which can be used for external test power lines or
signal lines.
7. Using 7-inch LCD touch screen control + PLC control can control
the temperature in the tank, water tank temperature, flow, water
pump and test time, etc.; the flow and temperature are directly
displayed on the touch screen, automatic constant current and
constant temperature.
8. Ice water splash test: the nozzle is fixed on the right side of
the test chamber; the spray distance is adjusted by moving the
sample.
9. The flow sensor is used to control the flow of the ice water
splash test. The signal of the flow sensor is fed back to the PLC,
and the automatic constant flow is controlled by PID, and the flow
is directly displayed on the touch screen.
10. Ice water immersion test: This test is not carried out at the
same time as the splash test, and meets the requirements of 5.4.3
in GB/T28046.4-2011. The cylinder drives the chain to move up and
down, and can be directly transferred from the test box to the
water tank. , The immersion time can be set, the setting range is
1~5min, the cycle number setting range: 1~999 times, the
temperature recovery time in the water tank is 30min.
11. The ice water temperature control device adopts the water cycle
refrigeration method to ensure the water temperature and the
uniformity of the mixed water.
12. The equipment has the function of automatic cleaning of
pipelines and inner boxes.
Technical parameter:
| High temperature inner box size | L 1000* D 1000* H 1500mm |
| External dimensions | L 1500* D 1900* H 2750mm |
| Basket size | L 500* D 500* H 500mm |
| Immersion tank size | L 600* D 600* H 600mm |
| Number of orifices | 2 slot nozzle |
| Nozzle position | Right side of inner box |
| Nozzle to sample distance | 325±25mm (manually adjustable) |
| Blue size | Length 500*width 500*height 500mm |
| Lifting blue load | 50KG |
| Immersion tank | About 200L (circulating water stirring, bottom slope, easy to clean
and drain) |
| High temperature range | RT+10°C～150°C (touch screen setting) |
| Heating rate | RT+10℃～150℃≤45min |
| Water temperature control range | (0～+4)℃ (touch screen setting) |
| Cooling rate | 25℃～2℃≤60min |
| Spray flow | (3~4) L/3S (touch screen setting) |
| Test liquid medium | Deionized water or +5%NaCl+3% Arizona fine dust |
| Injection time per cycle (30min) | 3S, interval time: interval time: 29m57s (touch screen setting) |
| Number of cycles | 100 times (touch screen setting) |
| Lift time | ≤20S (touch screen setting) |
| Time per immersion | 1～99 min (touch screen setting) |
| Immersion times | 1～99 (touch screen setting) |
| Temperature uniformity of ice water in immersion tank | ±0.5℃ |
| Automatic cleaning function | After the test is completed, the pipeline and inner box are
automatically cleaned (with a hand-held spray gun) |
| Water temperature cooling method | Pipeline circulating water flow cooling |
| Dust mixing method | Pipeline circulating water mixing |
| Sprinkler nozzle | Detachable slit nozzle (nozzle can be disassembled for cleaning) |
| How to use the test liquid | Recycle |
| Sample stage | Liftable |
| Device power | 380V/50Hz, three-phase five-wire system |
| Equipment power | 25.0KW |
| Security features | Leakage protection, water shortage protection, short circuit
protection, phase sequence protection, thermal overload protection |
Installation and use conditions:
1 Site of installation: Recommended installation position
dimensions ≥ W2000×D2500×H3000mm.
2 Power supply:380V / 50HZ(This is negotiable and adapted to
customer conditions),and the length of the power cable is 2.5 m.
3 Drainage requirement:Users should make drainage channels in the
site in advance.
Caution:
Due to the technical upgrade, some technical parameters do not
conform to the actual machine, please forgive us without further
notice.
The detail images of product:
air cylinder electromotor
Tags: Ice Water Shock Test Chamber , Ice Water Splash Test Chamber for
Testing EVCS , Ice Water Immersion Impact Test Machine
